Quality Machine Tools


You are here: Home » Products » SAWS » METAL BAND SAWING MACHINE » METAL BAND SAW BS712N


Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button


  • BS712N

Product characteristics

The cut element can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. The required band linear velocity is obtained by change of ratio on the belt pulley between the worm gear and the driving motor. The suitable speed of the arm lowering is obtained thanks to the valve controlling oil flow between the hydraulic cylinder chambers. The arm made of shaped spheroidal cast iron secures rigidity during operation and absorbs all kinds of vibrations. Close by the worm gear a control panel is situated. The cutting band power transmission system is composed of two cast iron wheels. The first wheel is a tensioning wheel (adjustment with a lever) and the second one is a drive wheel. To the tensioning wheel is transmitted directly the torque from a worm gear while the worm gear is driven by an electric motor. The band suitable angle of inclination is given through a set of bearing rollers. The base of the machine is a rigid cuboid made of steel sheets inside which is a cooling fluid container with a flood coolant pump. Thanks to a swivel vice it is possible to cut material at angles of 0 – 45o. To the upper part of the machine base a tank is fixed for flood coolant draining and a container for chips produced during material cutting. On the tank a cast iron work table is installed on which is the vice clamping material and to which the band-saw arm is fixed. In the lower part of the machine pedestal are holes for wheel axles. Safety during cutting process is secured by an electric installation meeting all CE requirements.  The machine is equipped with a limit switch that stops the machine after cutting process is finished, an emergency button, a number of microswitches that switch off the machine when e.g. the belt transmission guard or cutting band guard is opened. Additionally our machine model, as opposed to competitors, is equipped with a wire brush cleaning the cutting band off chips – it prevents from the blade blocking and gives more effective cutting.

Technical data

Cutting band size (mm) 2360 x 20 x 0,9
Band tension mechanical (hand)
Band speeds (m/min) 22, 34, 36, 72
Feed speed (m/min) 0-50 (stepless feed)
Arm lowering control stepless - hydraulic cylinder
Vice datum surface height (mm) 600
Power supply 3-phase, 400 V
Main motor power (kW) S1 100%: 0,75; S6 40%: 1,1 kW
Weight (kg) 180
Guarantee (months) 12/24
Instruction (TOS) Polish language
CE Declaration yes


Angle Tube Shape Square
180 300 x 180 180 x 180
45° 130 120 x 125 125 x 125


  • Veľmi výkonná profesionálna pásová píla Holzmann BS 712N na kov
  • Ideálna na rezanie materiálov ako sú uholníky, uhlové profily, oceľové trúbky atď.
  • Vyrobená z masívnych materiálov pre náročnú prácu
  • Vybavené s chladiacim čerpadlom na emulziu KSM5L
  • Rozmery pílového pásu2360x0,9x20mm
  • Jednoduchá manipulácia vďaka podvozku
  • Automatické vypínanie
  • Liatinová konštrukcia s vedením pásu v guľočkových ložiskách
  • Oddelovač triesok a chladiacej kvapaliny čerpadla
  • Rýchlosť rezania plynule nastaviteľná hydraulickým valcom
  • Profesionálny zverák s excentrickým upínačom a pravítkom

Obsah dodávky: bimetalový pílový páspodvozokautomatické koncové vypínanie, doraz obrobku,čerpadlo chladiacej kvapaliny

Technické parametre:

  • Plný materiál a rúry 90°/45°Ø 205 mm/143 mm
  • Plné štvorcové a profily 90°/45°/LXH/: 205x215 mm/143x115 mm
  • Otočenie+/-45 °
  • Rýchlosť rezu24 - 41 - 61 - 82 m/min
  • Rozmery pílového pásu2360x20x0,9 mm
  • Výkon motora S1(100%)/S61100W/1650 W
  • Napätie400 V
  • Čistá hmotnosť190 kg
  • Hmotnosť balenia227 kg
  • Rozmery balenia1230x650x820 mm/560x540x280 mm

Leave Messages
Contact us