 |
DESCRIPTION
In this metalworking machine the metal lathe is bigger than in master 520 because the distance between center is 750 mm. As well as the smallest model it has two indipendet single phase motors 750 an automatic, the feed in both direction (cross and longitudinal) and can perform metric and inch threads with extreme precision. The basic model is supplied with 2 independently 750W in single phase motor. The standard machine is supplied with a 3 jaw chuck, 2 dead centre with conical attack, 2 rest, metal stand and working tool kit.
| Technical data | |
| DIMENSIONS | |
| Dimensions with stand | 1150 mm (L) x 500 mm (W) x 1680 mm (H) |
| Dimensions without stand | 1100 mm (L) x 500 mm (W) x 900 mm (H) |
| Net weight | 275 Kg |
| METAL LATHE | |
| Distance between centers | 520 mm |
| Centre Height | 155 mm |
| Max swing over the bed | 300 mm |
| Chuck diameter | 130 mm |
| Spindle Bore | 26 mm |
| Range of spindle speeds | 160 to 1600 rpm |
| Metric thread | 0,5 mm to 3 mm |
| Inch thread | 11 to 40 TPI |
| Longitudinal travel | 570 mm |
| Cross travel | 250 mm |
| Tail stock taper | CM3 |
| Spindle taper | CM4 |
| Powerful motor | 750 W |
| Voltage motor | 1 Phase (220 V) |
| Milling and Drilling | |
| Spindle taper | CM3 |
| Spindle dia. | 80 mm |
| Spindle speeds | Da 125 a 1600 rpm |
| Head tilt | 360° |
| Table size | 425 mm x 150 mm |
| Powerful motor | 750 W |
| Voltage motor | 1 Phase (220 V) |
| FEED | |
| Longitudinal feeds | Automatic in both direction |
| Cross feeds | Automatic in both direction |
DESCRIPTION
In this metalworking machine the metal lathe is bigger than in master 520 because the distance between center is 750 mm. As well as the smallest model it has two indipendet single phase motors 750 an automatic, the feed in both direction (cross and longitudinal) and can perform metric and inch threads with extreme precision. The basic model is supplied with 2 independently 750W in single phase motor. The standard machine is supplied with a 3 jaw chuck, 2 dead centre with conical attack, 2 rest, metal stand and working tool kit.
| Technical data | |
| DIMENSIONS | |
| Dimensions with stand | 1150 mm (L) x 500 mm (W) x 1680 mm (H) |
| Dimensions without stand | 1100 mm (L) x 500 mm (W) x 900 mm (H) |
| Net weight | 275 Kg |
| METAL LATHE | |
| Distance between centers | 520 mm |
| Centre Height | 155 mm |
| Max swing over the bed | 300 mm |
| Chuck diameter | 130 mm |
| Spindle Bore | 26 mm |
| Range of spindle speeds | 160 to 1600 rpm |
| Metric thread | 0,5 mm to 3 mm |
| Inch thread | 11 to 40 TPI |
| Longitudinal travel | 570 mm |
| Cross travel | 250 mm |
| Tail stock taper | CM3 |
| Spindle taper | CM4 |
| Powerful motor | 750 W |
| Voltage motor | 1 Phase (220 V) |
| Milling and Drilling | |
| Spindle taper | CM3 |
| Spindle dia. | 80 mm |
| Spindle speeds | Da 125 a 1600 rpm |
| Head tilt | 360° |
| Table size | 425 mm x 150 mm |
| Powerful motor | 750 W |
| Voltage motor | 1 Phase (220 V) |
| FEED | |
| Longitudinal feeds | Automatic in both direction |
| Cross feeds | Automatic in both direction |
