 |
BIG PARALLEL LATHE HELLER TPG1250X1500-15000
| Quantity: | |
|---|---|
| Distance between centers (mm) | 1500~15000 |
| Modular pitch | (45) 0,5-60 |
| Diametral pitch | (38) 1/2-56 |
| Main spindle pitch (mm) | 12 |
| Cross carriage travel (mm) | 520 |
| Carriage travel (mm) | 300 |
| Max. dimension of tool (mm) | 45x45 |
| Diameter tailstock quill (mm) | 160 |
| Tailstock spindle travel (mm) | 300 |
| Tailstock morse taper | MT 6 |
| Power main motor (Kw) | 22 |
| Power of motor pump (Kw) | 0,09 |
| Dimensions (mm) (length x width x height) | 4150x1550x1630 |
| Whitworth pitch per inch | (31) 14-1/4 |
| Metric pitch | (44) 1-20 |
| Swing over bed (mm) | 1250 |
| Swing over carriage (mm) | 865 |
| Bed width (mm) | 755 |
| Main spindle hole (mm) | 130 |
| Spindle speed range (rpm) | 2-200 |
| Speed number | 21 |
| Longitudinal feed (mm/rev) | (56) 0.1-12 |
| Cross feed (mm/rev) | (56) 0,05-6 |
| Net weigth (Kg) | 4900 |
| Distance between centers (mm) | 1500~15000 |
| Modular pitch | (45) 0,5-60 |
| Diametral pitch | (38) 1/2-56 |
| Main spindle pitch (mm) | 12 |
| Cross carriage travel (mm) | 520 |
| Carriage travel (mm) | 300 |
| Max. dimension of tool (mm) | 45x45 |
| Diameter tailstock quill (mm) | 160 |
| Tailstock spindle travel (mm) | 300 |
| Tailstock morse taper | MT 6 |
| Power main motor (Kw) | 22 |
| Power of motor pump (Kw) | 0,09 |
| Dimensions (mm) (length x width x height) | 4150x1550x1630 |
| Whitworth pitch per inch | (31) 14-1/4 |
| Metric pitch | (44) 1-20 |
| Swing over bed (mm) | 1250 |
| Swing over carriage (mm) | 865 |
| Bed width (mm) | 755 |
| Main spindle hole (mm) | 130 |
| Spindle speed range (rpm) | 2-200 |
| Speed number | 21 |
| Longitudinal feed (mm/rev) | (56) 0.1-12 |
| Cross feed (mm/rev) | (56) 0,05-6 |
| Net weigth (Kg) | 4900 |
