 |
Characteristic:
Floor type bed way, with auxiliary slide way, enhance machine’s rigidity and stability, can be use for processing large diameter and lighter parts, reduce user’s investment cost for equipments.
| MAIN SPECIFICATION | CW6163F | CW6263F | CW6180F | CW6280F | CW6195F | CW6295F |
| MAX SWING OVER BED | 630MM | 800MM | 950MM | |||
| MAX. SWING OVER CARRIAGE | 350MM | 520MM | 640MM | |||
| MAX SWING IN GAP | 800MM | 970MM | 1120MM | |||
| LENGTH OF GAP | 390MM | 390MM | 390MM | |||
| MAX LENGTH OF WORKPIECE | 1000, 1500, 2000, 3000, 4000, 5000, 6000, 8000,10000MM | |||||
| SPINDLE BORE | 105MM | |||||
| TAPER IN SPINDLE BORE(1:20) | METIC 120MM | |||||
| RANGE OF FORWARD SPINDLE SPEEDS | 6-800R/MIN, 18 KINDS | |||||
| RANGLE OF LONGITUDINAL FEEDS | 0.1-24.3MM/R, 64 KINDS | |||||
| RANGE OF FINE LONGITUDINAL FEEDS(WITH CHANGE GEARS) | 0.05-12.15MM/R | |||||
| CROSS EQUAL TO 1/2 LONGITUDINAL FEED | 0.05-12/5MM/R(0.00197-0.48IN/R) | |||||
| RAPID TRAVERSE OF CARRIAGE | 4000MM/MIN | |||||
| THREAD CUTTING: | ||||||
| METRIC THREADS | 1-240MM. 50 KINDS | |||||
| WHITWORTH THREADS | 14-1 TPI, 26 KINDS | |||||
| MODULE THREADS | 0.5-120MM, 53 KINDS | |||||
| DIAMETRAL PITCH THREADS | 28-1D.P 24 KINDS | |||||
| TAPER CENTER | MORSE NO.5 | |||||
| MOTOR POWER | 11KW | |||||
Characteristic:
Floor type bed way, with auxiliary slide way, enhance machine’s rigidity and stability, can be use for processing large diameter and lighter parts, reduce user’s investment cost for equipments.
| MAIN SPECIFICATION | CW6163F | CW6263F | CW6180F | CW6280F | CW6195F | CW6295F |
| MAX SWING OVER BED | 630MM | 800MM | 950MM | |||
| MAX. SWING OVER CARRIAGE | 350MM | 520MM | 640MM | |||
| MAX SWING IN GAP | 800MM | 970MM | 1120MM | |||
| LENGTH OF GAP | 390MM | 390MM | 390MM | |||
| MAX LENGTH OF WORKPIECE | 1000, 1500, 2000, 3000, 4000, 5000, 6000, 8000,10000MM | |||||
| SPINDLE BORE | 105MM | |||||
| TAPER IN SPINDLE BORE(1:20) | METIC 120MM | |||||
| RANGE OF FORWARD SPINDLE SPEEDS | 6-800R/MIN, 18 KINDS | |||||
| RANGLE OF LONGITUDINAL FEEDS | 0.1-24.3MM/R, 64 KINDS | |||||
| RANGE OF FINE LONGITUDINAL FEEDS(WITH CHANGE GEARS) | 0.05-12.15MM/R | |||||
| CROSS EQUAL TO 1/2 LONGITUDINAL FEED | 0.05-12/5MM/R(0.00197-0.48IN/R) | |||||
| RAPID TRAVERSE OF CARRIAGE | 4000MM/MIN | |||||
| THREAD CUTTING: | ||||||
| METRIC THREADS | 1-240MM. 50 KINDS | |||||
| WHITWORTH THREADS | 14-1 TPI, 26 KINDS | |||||
| MODULE THREADS | 0.5-120MM, 53 KINDS | |||||
| DIAMETRAL PITCH THREADS | 28-1D.P 24 KINDS | |||||
| TAPER CENTER | MORSE NO.5 | |||||
| MOTOR POWER | 11KW | |||||
