 |
Product Feature
A precision and high quality and combinated turning, drilling, milling, boring and slotting in one. This is the machine for the most serious hobbyist or even a busy but crowded job shop. Its easy operation and to meet the various mechanical engineer requirements. This is an exceptional value and will make a great addition to any shop.
All metal gear headstock for lathe
Two ‘V’ guidway and gears are hardended and precision ground
Power longitudinal and cross feed
Mill/Drill headstock driven by a variable spindle speed from 0 – 2250rpm
Dovetail column
DRO on spindle digital spindle speed
Fine feed head control
2 speed gearbox for selecting low and high speed range
Head tilts up to±90º on left and right
Positive locks Mill/Drill head, quill and column
Elevating Mill/Drill headstock by handwheel easliy
Product Specifications
| Model | MP330V |
| Swing over bed | 330mm |
| Swing over carriage | 220mm |
| Center distance | 750/900mm |
| Spindle bore | 38mm |
| Spindle speed | 12 / 65-1650rpm |
| Spindle taper | MT5 |
| Compound slide travel | 60mm |
| Cross slide travel | 160mm |
| Range of longitudial feeding | 0.1-1.5mm/r |
| Range of cross feeding | 0.045-0.60mm/r |
| Metric thread | 12/0.5-4.0mm |
| Inch thread | 20/20-9tpi |
| Quill of tailstock travel | 80mm |
| Tailstock taper | MT3 |
| Main motor power for lathe | 1500w |
| MILLING & DRILLING | VAIRABLE SPEED HEAD |
| Drilling capacity | 16mm |
| Tapping capacity | 20mm |
| Face milling capacity | 63mm |
| Spindle speed (variable) | 4/200-2000rpm |
| Spindle taper | MT3 |
| Spindle travel | 180mm |
| Spindle nose to table | 280mm |
| Headstock titls at left/right | 360º / ±90º |
| Motor power for drill/mill | 750w |
| Machine weight(without stand) | 410kg |
| Packing size(without stand) | 1550x770x1150mm |
Standard Accessories
Optional Accessories By Extral Cost
Product Feature
A precision and high quality and combinated turning, drilling, milling, boring and slotting in one. This is the machine for the most serious hobbyist or even a busy but crowded job shop. Its easy operation and to meet the various mechanical engineer requirements. This is an exceptional value and will make a great addition to any shop.
All metal gear headstock for lathe
Two ‘V’ guidway and gears are hardended and precision ground
Power longitudinal and cross feed
Mill/Drill headstock driven by a variable spindle speed from 0 – 2250rpm
Dovetail column
DRO on spindle digital spindle speed
Fine feed head control
2 speed gearbox for selecting low and high speed range
Head tilts up to±90º on left and right
Positive locks Mill/Drill head, quill and column
Elevating Mill/Drill headstock by handwheel easliy
Product Specifications
| Model | MP330V |
| Swing over bed | 330mm |
| Swing over carriage | 220mm |
| Center distance | 750/900mm |
| Spindle bore | 38mm |
| Spindle speed | 12 / 65-1650rpm |
| Spindle taper | MT5 |
| Compound slide travel | 60mm |
| Cross slide travel | 160mm |
| Range of longitudial feeding | 0.1-1.5mm/r |
| Range of cross feeding | 0.045-0.60mm/r |
| Metric thread | 12/0.5-4.0mm |
| Inch thread | 20/20-9tpi |
| Quill of tailstock travel | 80mm |
| Tailstock taper | MT3 |
| Main motor power for lathe | 1500w |
| MILLING & DRILLING | VAIRABLE SPEED HEAD |
| Drilling capacity | 16mm |
| Tapping capacity | 20mm |
| Face milling capacity | 63mm |
| Spindle speed (variable) | 4/200-2000rpm |
| Spindle taper | MT3 |
| Spindle travel | 180mm |
| Spindle nose to table | 280mm |
| Headstock titls at left/right | 360º / ±90º |
| Motor power for drill/mill | 750w |
| Machine weight(without stand) | 410kg |
| Packing size(without stand) | 1550x770x1150mm |
Standard Accessories
Optional Accessories By Extral Cost
