Feature:
Hardened and ground bed ways.
52mm spindle bore,cast iron machine stand
16 speeds all geared head stock.
3HP(2.4kW)three phase motor.
Foot brake giving rapid braking.
Emergency stop button equipped on the front of headstock.
Jog button for easy gear engagement and inching spindle.
Open type chip pan easily to remove chips.
Extra safety switch shuts down machine automatically for changing belt or gear for threading cutting.
| SPECIFICATION | MODELS |
| CM6241×1000 CM6241 X 1500 |
| CAPACITY |
| Swing over bed | 410mm(16＂) |
| Swing over cross slide | 255mm(10＂) |
| Swing in gap | 580(23＂) |
| Length of gap | 250(10＂) |
| Distance between centers | 1000mm(40＂) |
| Center height | 20.5＂ |
| Width of bed | 250(10＂) |
| HEADSTOCK |
| Spindle nose | D1-6 |
| Spindle bore | 52mm(2＂) |
| Taper of spindle bore | No.6Morse |
| Range of spindle speed | 16 changes 45-1800r/min |
| FEEDS AND THREADS |
| Max.travel of compound rest | 102mm(4＂) |
| Max.travel of cross slide | 210mm(8-1/4＂) |
| Leadscrew pitch | 4T.P.I. |
| Max.Section of tool | 20×20mm(13/16＂) |
| Longitudinal feeds range | 0.05-1.7mm/rev(0.002＂-0.067＂/rev) |
| Cross oeeds range | 0.025-0.85mm(0.001＂-0.0335＂/rev) |
| Metric threads range | 39kinds 0.2-14mm |
| Inch threads range | 45kinds 2-72T.P.I |
| Diametrical pitchesrange | 21kinds 44D.P. |
| Module pitches range | 18kinds 0.3-3.5M.P. |
| TAILSTOCK |
| Dia.of tailstock sleeve | 50mm(2＂) |
| Travel of tailstock sleeve | 120mm(4-3/4＂) |
| Morse taper of tailstock sleeve | No.4 Morse |
| Cross adjustock | ±13mm(±1/2＂) |
| MOTOR |
| Power of main motor | 2.8/3.3kw(3.8/4.5HP)3PH |
| Power of coolant pump | 0.1KW(1/8HP),3PH |
| DIMENSION AND WEIGHT |
| Overall dimension(L×W×H) mm | 1940×850×1300 | 1940×850×1320 |
| Packing size(L×W×H)mm | 2060×900×1640 | 2060×900×1640 |
| Net weight/Gross weight | 1500/1750 | 1550/1800 |
| STANDARD ACCESSORIES |
- 200mm Three Jaw Chuck and Adapter
- 320mm Four Jaw Chuck and Adapter
- 300mm Face Plates
- Steady Rest
- Follow Rest
- Thread Chasing Dial
- Mt/6/4 Sleeve and MT 4 Center
- Oil Gun
- One set of Wrenches
- Operation Manual
|
| SPECIAL ACCESSORIES |
| 1. 200mm Driving plate 2.Quick change Tool Post 3.Taper Turning Attachment |
